3M Digital Projector X20, Product Safety Manual

Page: 10 / 104

3M™ Multimedia Projector X20 Product Safety Guide © 3M 2006 10
Lamp
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact 1-800-362-3577 (3M Canada)
WARNING
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the “OPTION” using the
ź
button, and press the
Ź
button or the ENTER button.
Choose the “LAMP TIME” using the
ź
button.
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
¥
Note
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
3RLQWDWWKH³*R7R$GYDQFH0HQX«´LQWKHPHQXXVLQJźŸEXWWRQWKHQSUHVVWKH
ŹEXWWRQ
3RLQWDWWKH³237,21´LQWKHOHIWFROXPQRIWKHPHQXXVLQJźŸEXWWRQWKHQSUHVV
WKHŹEXWWRQ
3RLQWDWWKH´/$037,0(´XVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ$GLDORJZLOO
appear.
3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKHGLDORJ,WSHUIRUPVUHVHWWLQJWKHODPS
time.
ENGLISH