![background image](http://html1.mh-extra.com/html/3m/charge-analyzer-711/charge-analyzer-711_quick-start-manual_3158023012.webp)
3M™ Model 711 Digital Conversion Station
Quick Start Guide
12
©3M June 2000
c) Position the monitor and tighten the black knob next to the support mast.
d) Change the angle of the monitor by loosening the black knob next to the monitor.
WARNING: BEFORE CONTINUING, MAKE SURE THE POWER TO THE CONVERSION
STATION IS OFF.
9. Connect the gray video cable (50-pin connector) to the connector located in the back of the
monitor (
Figure 11
).
a) Push any excess cable down inside the cabinet.
Figure 11: Gray video cable connected to monitor
10. Inside the conversion station cabinet (
Figure 12
):
a) Connect the black scanner cable to the Scanner Power connector (Com 4) on the
computer. Tighten screws (2).
Figure 12: Computer cable connections
b) Connect the gray video cable to the video connector (Video) on the computer (
Figure
12
).
9.
a)
a)
b)
10.