Quick Start Guide
3M™ Model 711 Digital Conversion Station
©3M June 2000
11
8. Stand at the back of the Conversion Station and grasp the support mast (
Figure 9
).
Figure 9: Inserting support mast into mast hole, gray video cable held in mast hole slot
a) The bottom of the support mast has a notch.
•
With the notch facing the front of the unit, insert the support mast in the mast hole.
•
The notch fits over a pin located inside the cabinet.
•
Make sure the mast is seated on the pin.
Figure 10: Rotating the support mast with monitor facing toward front of unit
b) Twist the black knob next to the support mast one rotation to loosen the knob (
Figure
10
).
8.
notch
a)
b)
c)
d)
