Quick Start Guide
3M™ Model 711 Digital Conversion Station
©3M June 2000
7
Unpacking
1.
Unlatch the shipping crate (
Figure 1
). Conversion Stations are shipped unlocked with the
keys attached inside the front doors.
Figure 1: Unopened Crate
2. Remove the side of the crate. The side you remove will be used as a ramp.
3. Set the ramp onto the pallet so that the pins on one end of the ramp align with holes on the
pallet.
Figure 2: Crate Opened and Ramp Installed on Pallet
4. Insert the pins into the holes on the ramp (
Figure 2
).
5. Remove the wood and foam supports (
Figure 2
).
1.
5.
3.
4.
2.
