3Disc Heron IOS User Manual Download Page 67

Page: 67 / 72

Page 67

8.10

Symbols on the Heron and Transport Case

Symbol

Description

Manufacturer’s trade name and address (ISO 15223-1)

Date of manufacture (ISO 15223-1)

Equipment Power On/Off (push/push)

USB 3.0 plug

Warning, Consult Accompanying Documents

General mandatory action manual

General prohibition indication

User Manual Reference

Directive on Waste Electrical and Electronic Equipment

Authorized Representative in the European Community

Risk Group 2

CAUTION. Possibly hazardous optical
radiation emitted from this product. Do

not stare at operating lamp. May be
harmful to the eye

Warning label for LED

Non-ionizing electromagnetic radiation

Direct Current

Type(B) Level of protection against electric shock

Consult operating instruction for use.

European Conformity mark

Prescription symbol

Non-sterile (Scanner-Tips) (IOS-FPL-71-001)

User manuals are available electronically at the link provided (3disc.com/support)

Summary of Contents for Heron IOS









































































Search results

Summary of Contents for Heron IOS

Reviews:

Brands by name

Popular brands

3Disc Heron IOS, User Manual

Search results

Summary of Contents for Heron IOS

Reviews:

Brands by name

Popular brands