manualshive.com logo in svg

3Disc Heron IOS, User Manual

Share
Download
3Disc Heron IOS User Manual Download Page 59

Page 59

 

 

 

8.3

 

General Warnings

 

8.3.1

 

System Modification

 

 

8.3.2

 

Approved Software

 

The Heron™ IOS device is designed to operate with the HeronClinic™ software.  See 

section 5 below for details. 

8.3.3

 

Equipment Failure

 

8.4

 

Mechanical

 

Hazards

 

8.4.1

 

Moving Parts

 

 

WARNING

: In case of system malfunction or failure, you should: 

Prevent any contact between the system and the patient.

 

Unplug the system from the power outlet and the computer. 

Store the system away so it cannot be used by someone else. 

Contact service personal.

 

 

 

WARNING

: Modifying the system may result in physical injury to the 

patient and operator, and damage to the system.

 

 

 

WARNING

: The Heron™ IOS scanner should only be used with 

approved, compatible software.

 

 

 

NOTE

: All moving parts are inside handheld scanner so do not 

open the unit. 

Summary of Contents for Heron IOS









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands