3DAeroventures X-100 Infinity Wing V2, Build Manual

Page: 34 / 40

Dolly R1/R2
Dolly Rear Support
Notches Face Inward
Dolly Front Support
www.3daeroventures.com
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
w�w�3�A�r�v�n�u�e�.�o�
- 3� -
Step 7.1 Glue Printed Parts Together
7.1.1 Glue parts Dolly R1 and Dolly R2 together using the alignment tabs to key
the parts together.
7.1.2 Glue parts Dolly L1 and Dolly L2 together using the alignment tabs to key
the parts together.
7.1.3 The Base is made up of two identical parts called “Dolly Base” Glue the
two Dolly Base parts together.
7.1.4 Glue the Dolly Front Support and Dolly Rear Support into their recesses in
the R1/R2 assembly. Make sure the notches on the Front and Rear supports
are facing towards the inside of the assembly.
Optional Dolly Assembly (cont’d)