3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
Step-by-Step Build Guide (cont’d)
2.5.2 Cut a 3mm diameter carbon rod, wooden dowel, or plastic dowels into
qty. 3, 10mm long pieces. These small dowel pins will be used to align
parts Canopy 1 and Canopy 2 for gluing.
Step 2.5 Assemble the Canopy
2.5.3 Insert your 3mm diameter pins into part Canopy 1, apply glue to the
mating face and mate to part Canopy 2.
2.5.1 Use a Soldering Iron or a hot knife to remove the support panel
on both Canopy 1 and Canopy 2. Cleanup the edge with sandpaper.
