3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
Step-by-Step Build Guide (cont’d)
Step 3. Front Wing Assembly
Tools and Materials Needed:
- Medium Bodied CA/Super Glue
- Accelerator for CA
- Sandpaper and/or Small Files
Printed Parts Needed:
3.1.1 Glue parts Front Wing R1 - Front Wing R3
together using CA glue. Spray accelerator
on the joint to speed curing of the CA glue.
The built in alingment tabs will keep all
parts well aligned. You can then glue on
part Front Wing Tip R.
3.1.2 Repeat the previous step for the front left
wing, using parts Front Wing L1 - Front
Wing L3 and Front Wing Tip L.
Step 3.1 Glue The Front Wing Parts Together
Front Wing Tip R
Front Wing R3
Front Wing R2
Front Wing R1
NOTE: Parts Front Wing Tip R and Front Wing Tip L contain a sacrificial support
structure that was generated in Simplify3D.
