3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 2� -
Step-by-Step Build Guide (cont’d)
4.3.5 Repeat Steps 4.3.1 - 4.3.5 for the Back Left Wing
4.3.3 Route the servo wire through the wing and screw the Servo Cover R to
the wing using M2 thread forming screws.
4.3.4 Install your preferred servo control linkages. We used a 1.2mm O.D. steel
wire with a Z bend on the servo control horn and a connector linkage on
the elevon control horn.
