Fuse Tray 1
(PLA)
Fuse Tray 2
(PLA)
Fuse Tray 3
(PLA)
Fuse 2
Fuse 3
Fuse 4
Fuse 1
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
Step-by-Step Build Guide (cont’d)
Fuse 2 Removable Support
2.3.1 Starting with Fuse 1, apply CA adhesive to the rails where Fuse Tray 1 slides
into place.
Ensure Fuse Tray 1 is fully seated into place in the rail behind
the firewall and wipe off any residual glue from the Fuse 1 surface that
mates with Fuse 2 before applying CA Accelerator to secure the bond.
2.3.2 Continue Gluing the Fuse and Fuse Tray parts, together, followng the order
shown in the image below.
NOTE: Part Fuse 2 contains a sacrificial support
structure in the wheel bay area. this can be pulled away with slight force.
