4. Select Done when the Vat Insertion Complete prompt appears.
9.6 Check Material Temperature
Check the material temperature and confirm it has reached the set settings.
9.7 Optional Resin Mixer
If your printer runs Blue Stone or HPC materials, you will have
a resin mixer installed in the vat. Once set up, the operation of
the mixer will be automatic:
• If the printer is idle for 30 minutes, the mixer will turn on.
Any interaction with the printer will restart this 30-minute
timer.
• The mixer will run for 30 minutes, along with the elevator/
print platform stirring.
• The mixer will turn off for 330 minutes, while the elevator/
print platform will continue to stir the material until the
user presses Stop on the touch screen.
3D Systems, Inc.
85
p/n 40-D150, Rev. C
Summary of Contents for SLA 750 Series
