manualshive.com logo in svg

3D Systems SLA 750 Series, User Manual, Page: 30 / 101

Share
Download
3D Systems SLA 750 Series User Manual Download Page 30

2

Chamber Lights: Turn on/off chamber lights.

3

Shutter Icon: Indicates if the laser shutter is either open or closed.

4

Status: Displays the printers current status.
• Idle
• Busy
• Initializing
• Printing

5

Active/Current print

6

Activity Log: Displays what the printer has been doing.

7

Estimated Build Time: Build time remaining.

8

Build Percentage Bar: Percentage of build complete.

9

Delay Start Time: Set a desired future build.

10

Start/Pause/Stop:

11

Scale Factor: Adjust the build size in X/Y by increasing or decreasing scale factors.

12

Material: Current Material loaded in vat.

13

Live Video: Opens chamber web cam for remote use.

14

Edit Build: Opens build properties and editable features.

15

Build Preview:

16

Sub Menu: Opens Elevator & Recoater, Laser and Material menus.

17

Expand icon: Expands the Sub menu to full screen.

18

Navigation Bar: The navigation bar consists of three distinct tabs: Status, Queue, and Settings. Select any of these

tabs to open up a new screen and navigate through the selected item.

6.3  Queue

The Print Queue screen displays the current jobs waiting to be processed.

3D Systems, Inc.

26

p/n 40-D150, Rev. C

Summary of Contents for SLA 750 Series






































































































Reviews:

No comments