3Com TP-1610, Usermanualmanual

Page: 453 / 496

V6100 and V7122 User Guide
453
To install the Hard Drive (HDMX) module, follow these 6 steps:
1 Place the V6100, so that the rear panel is facing you, as shown in Figure 151.
2 Remove the black metal cover plates in the first and second slots located on the right
side of the power connection, as shown in
Figure 152 .
3 Use the cutter tool to remove the small metal strip between the upper and lower slots, as
shown in
Figure 153 .
4
Insert the Hard Drive (HDMX) module in the second slot, as shown in Figure 155 .
Figure 155 Inserting the HDMX Module
5
Push the Hard Drive (HDMX) module into the slot and press on it firmly to ensure it has
been fully inserted.
6
Using a straight regular screwdriver, tighten the mounting pins.
Reader’s Notes