3Com TP-1610, Usermanualmanual, Page: 333 / 496

V6100 and V7122 User Guide
333
Parameter Name Description
First to Fourth Proposal
Encryption Type
[IPSecPolicyProposalEncrypt
ion_X]
Determines the encryption type used in the quick mode negotiation for up to
four proposals.
X stands for the proposal number (0 to 3).
The valid encryption values are:
Not Defined (default)
None
[0] = No encryption
DES-CBC [1]
Triple DES-CBC [2]
First to Fourth Proposal
Authentication Type
[IPSecPolicyProposalAuthen
tication_X]
Determines the authentication protocol used in the quick mode negotiation
for up to four proposals.
X stands for the proposal number (0 to 3).
The valid authentication values are:
Not Defined (default)
HMAC-SHA-1-96
[2]
HMAC-MD5-96 [4]
If no IPSec methods are defined (Encryption / Authentication), the default settings (shown in
Table 77 ) are applied.
Table 77 Default IKE Second Phase Proposals
Encryption Authentication
Proposal 0 3DES SHA1
Proposal 1 3DES MD5
Proposal 2 DES SHA1
Proposal 3 DES MD5
To configure the SPD table using the ini file:
SPD table is configured using ini file tables (described in Using Parameter Tables ). Each line
in the table refers to a different IP destination.
The Format line (SPD_INDEX in the example below) specifies the order in which the actual
data lines are written. The order of the parameters is irrelevant. Parameters are not
mandatory unless stated otherwise. To support more than one Encryption / Authentication
proposals, for
each proposal specify the relevant parameters in the Format line. Note that the
proposal list must be contiguous.