3Com TP-1610, Usermanualmanual, Page: 61 / 496

V6100 and V7122 User Guide
61
3 Fasten the screws on the front panel of the board to secure the board to the chassis.
To insert the TP-1610 RTM into the chassis:
1
Choose an available slot in a compactPCI™ chassis and gently insert the TP-1610 RTM
into it; as the TP-1610 RTM is inserted, the black plastic handles, at both ends of the
board’s panel, must engage with the chassis. When the TP-1610 RTM is firmly mounted
into the correct position inside the chassis, the red plastic latches within each handle
self-lock (this also ensures that the TP-1610 board is properly earthed via the chassis).
2 Fasten the screws on the front panel of the board to secure the board to the chassis.
Removing Boards
To remove the TP-1610 board from the chassis:
1
Unfasten the screws on the plate of the board.
2
Press the red ejector buttons on the two black ejector/injector latches on both ends and
wait for the hot-swap blue LED to light, indicating that the board can be removed.
3
Pull on the two ejector/injector latches and ease out the board from the slot.