3Com Switch 8807, Command Reference Manual

Page: 444 / 1099

442 C
HAPTER
25: OSPF C
ONFIGURATION
C
OMMANDS
import-route Syntax
import-route protocol [ cost value | type value | tag value | route-policy
route-policy-name ]*
undo import-route protocol
View
OSPF view
Parameter
protocol : Specifies the source routing protocol that can be imported. At present, it
includes direct , rip , isis , bgp , ospf-ase , ospf-nssa and static .
cost value : Specifies the cost of imported route.
type value : Specifies the cost type of imported external routes. The value ranges
from 1 to 2.
tag value : Specifies the value of tag for imported external routes.
route-policy route-policy-name : Configures only to import the routes matching
the specified Route-policy.
Description
Use the import-route command to import routes from another routing protocol.
Use the undo import-route command to disable OSPF to import routes from the
specified routing protocol.
By default, the routing information of other protocols is not imported.
n
You are recommended to configure the route type, cost and tag together in one
command. Otherwise, the new configuration overwrites the old one.
Example
# Specify an imported RIP route as the route of type 2, with the route tag as 33
and the route cost as 50.
[3Com-ospf-1] import-route rip type 2 tag 33 cost 50
import-route-limit Syntax
import-route-limit num
undo import-route-limit
View
OSPF view
Parameter
num : Specifies the maximum number of exterior routes allowed to be imported.