3Com Switch 8807, Command Reference Manual

Page: 280 / 1099

278 C
HAPTER
18: ACL C
ONTROL
C
OMMANDS TO
C
ONTROL
L
OGIN
U
SERS
write-view : Name of read-write view, ranging from 1 to 32 bytes.
notify-view : Sets notify view.
notify-view : Name of notify view, ranging from 1 to 32 bytes.
acl acl-number : Number identifier of basic number-based ACLs, ranging from
2000 to 2999.
Description
Use the snmp-agent group command to configure a new SNMP group and
reference the ACL to perform ACL control to the network management users by
acl acl-number . Use the undo snmp-agent group command to remove a
specified SNMP group.
Example
# Create a SNMP group "3com", and reference the ACL 2001 to perform ACL
control to the network management users (basic ACL 2001 has already been
defined).
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] snmp-agent group v1 3com acl 2001
snmp-agent usm-user Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number ]
undo snmp-agent usm-user { v1 | v2c } user-name group-name
snmp-agent usm-user v3 user-name group-name [ authentication-mode {
md5 | sha } auth-password ] [ privacy des56 priv-password ] [ acl acl-number ]
undo snmp-agent usm-user v3 user-name group-name { local | engineid
engineid-string }
View
System view
Parameter
v1 : V 1 security mode.
v2c : V 2 security mode.
v3 : V 3 security mode.
user-name : User name, ranging from 1 to 32 bytes.
group-name : Corresponding group name of the user, ranging from 1 to 32 bytes.
authentication-mode : Specifies the security level to "to be authenticated"
md5 : Specifies the authentication protocol as HMAC-MD5-96.
sha : Specifies the authentication protocol as HMAC-SHA-96.