3Com Switch 8807, Command Reference Manual

Page: 137 / 1099

Ethernet Port Configuration Commands 135
Parameter
hybrid : Displays Hybrid port.
trunk : Displays Trunk port.
Description
Use the display port command to view the ports in the current system, whose
link type is Hybrid or Trunk. If there is any such port, display the corresponding
port name and the information about passing VLANs.
Example
# Display the Hybrid ports in the current system and the information about passing
VLANs.
<SW8800> display port hybrid
Interface VLAN passing:
Ethernet3/1/1 Tagged : 3, 5, 7, 9, 11
Untagged: 1-2, 4, 6,
Ethernet3/1/2 Tagged : none
Untagged: 1
The information above shows that the current system has two hybrid ports:
Ethernet 3/1/1 and Ethernet 3/1/2. The tagged VLANs that pass Ethernet3/1/1 are
3, 5, 7, 9, and 11, and the untagged VLANs that pass it are 1, 2, 4, and 6. No
tagged VLAN passes Ethernet3/1/2, and untagged VLAN 1 passes Ethernet 3/1/2.
# Display the Trunk ports in the current system.
<SW8800> display port trunk
Interface VLAN passing
Ethernet3/1/3 1, 3-5, 10
Ethernet3/1/4 none
Ethernet3/1/7 1
The information above shows that the current system has three Trunk ports:
Ethernet 3/1/3, Ethernet 3/1/4, Ethernet2/1/7. The VLANs that pass Ethernet 3/1/3
are 1, 3, 4, 5, and 10. No VLAN passes Ethernet 3/1/4. VLAN 1 passes Ethernet
3/1/3.
duplex Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameter
auto : Port auto-negotiation attribute.
full : Port full-duplex attribute.
half : Port half-duplex attribute.