3Com Switch 8807, Command Reference Manual

Page: 1031 / 1099

System Status and System Information Query Commands 1029
The maximum time value supported by this command is 23:59:59 9999/12/31.
Related command: clock datetime .
Example
# View the current system date and time.
<SW8800> display clock
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
display debugging Syntax
display debugging [ interface interface-type interface-number ] [ module-name
]
View
Any view
Parameter
interface - type : Interface type supported by the switch, including Ethernet,
GigabitEthernet, AUX, and Vlan-interface.
interface-number : Interface number.
module-name : Module name.
Description
Use the display debugging command to display debugging that has been
enabled.
You can execute the display debugging to view the specific debugging that has
been enabled. If the command is executed without any parameter specified, the
system will display all debugging that has been enabled.
Related command: debugging .
Example
# Display all debugging that has been enabled.
<SW8800> display debugging
Multicast packet forwarding debugging switch is on
display fiber-module Syntax
display fiber-module [ interface-type interface-number ]
Table 150 Description on the fields of the display clock command
Field Description
18:36:31 beijing Sat 2002/02/02 Current system time
Time Zone : beijing add 01:00:00 Configured time zone information
Summer-Time : bj one-off 01:00:00
2003/01/01 01:00:00 2003/08/08 01:00:00 Configured summer time information