3Com Switch 8807, Command Reference Manual

Page: 561 / 1099

IP Routing Policy Configuration Commands 559
Parameter
interface-type : Specifies interface type.
interface-number : Specifies interface number.
Description
Use the if-match interface command to configure to match the route whose
next hop is designated interface.
Use the undo if-match interface command to cancel the setting of matching
condition.
By default, no if-match sub-statement is defined.
This command is an if-match sub-statement of route-policy, used to match the
interface corresponding to the route next hop in route filtering.
Related commands: if-match acl , if-match ip-prefix , if-match ip next-hop ,
if-match cost , if-match tag , route-policy , apply ip next-hop , apply cost ,
apply local-preference , apply origin , apply tag .
Example
# Define an if-match sub-statement to match the route whose next hop interface
is Vlan-interface 1
[3Com-route-policy] if-match interface Vlan-interface 1
if-match ip next-hop Syntax
if-match ip next-hop { acl acl-number | ip-prefix ip-prefix-name }
undo if-match ip next-hop [ ip-prefix ]
View
Route policy view
Parameter
acl-number : Specifies the number of the access control list used for filtration. The
range is 2000 to 2999.
ip-prefix-name : Specifies the name of the prefix address list used for filtration. Its
length ranges from 1 to 19.
Description
Use the if-match ip next-hop command to configure one match rule on next
hop address of routing information for the route-policy.
Use the undo if-match ip next-hop command to cancel the setting of ACL
matching condition.
Use the undo if-match ip next-hop ip-prefix command to cancel the setting of
address prefix list matching condition.
Filtration is performed by quoting an ACL or an address prefix list.