3Com Switch 8807, Command Reference Manual

Page: 344 / 1099

342 C
HAPTER
21: AAA
AND
RADIUS/HWTACACS P
ROTOCOL
C
ONFIGURATION
C
OMMANDS
reset radius statistics Syntax
reset radius statistics
View
User view
Parameter
None
Description
Use the reset radius statistics command to clear the statistic information related
to the RADIUS protocol.
Related command: display radius .
Example
# Clear the RADIUS protocol statistics.
<SW8800> reset radius statistics
reset
stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name |
session-id session-id | time-range start-time stop-time | user-name user-name }
View
User view
Parameter
radius-scheme radius-server-name : Configures to delete the stopping accounting
requests from the buffer according to the specified RADIUS scheme.
radius-server-name specifies the RADIUS scheme name with a character string not
exceeding 32 characters.
session-id session-id : Configures to delete the stopping accounting requests from
the buffer according to the specified session ID. session-id specifies the Session ID
with a character string not exceeding 50 characters.
time-range start-time stop-time : Configures to delete the stopping accounting
requests from the buffer according to the saving time. S tart-time specifies the start
time of the saving time range and stop-time specifies the stop time of the saving
time range. The time is expressed in the format hh:mm:ss-yyyy/mm/dd. When this
parameter is set, all the stopping accounting requests saved since
start-time to
stop-time will be deleted.
user-name user-name : Configures to delete the stopping accounting requests
from the buffer according to the username. User-name specifies the username, a
character string not exceeding 32 characters, excluding "/", ":", "*", "?", "<"
and ">". The @ character can only be used once in one username. The pure
username (the part before @, namely the user ID) cannot exceed 24 characters.