3Com SuperStack 4, Configuration Manual

Page: 370 / 432

382 C
HAPTER
12: F
ILE
S
YSTEM
M
ANAGEMENT
connected to the Switch and access the Switch using username “client001” and
password “3com”.
3 For RSA authentication mode:
Create local user client002
[SW5500] local-user client002
[SW5500-luser-client002] service-type ssh
4 Specify AAA authentication on the user interface.
[SW5500] user-interface vty 0 4
[SW5500-ui-vty0-4] authentication-mode scheme
5 Select SSH protocol on the Switch.
[SW5500-ui-vty0-4] protocol inbound ssh
6 Specify RSA authentication on the Switch.
[SW5500] ssh user client002 authentication-type RSA
7 Configure RSA key pair on the Switch.
If you followed the procedure for generating and executing a ".bat" file
containing keys then you need not perfom this step.
[SW5500] rsa peer-public-key switch002
[SW5500-rsa-public] public-key-code begin
[SW5500-key-code] 308186028180739A291ABDA704F5D93DC8FDF84C427463
[SW5500-key-code] 1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[SW5500-key-code] D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[SW5500-key-code] 0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[SW5500-key-code] C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[SW5500-key-code] BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[SW5500-key-code] public-key-code end
[SW5500-rsa-public] peer-public-key end
[SW5500] ssh user client002 assign rsa-key key002
You need to specify RSA private key which corresponds to the public key for the
SSH user client002.
Run SSH1.5 client program on the PC that has been configured with private RSA
private key and you can set up SSH connection.