manualshive.com logo in svg

3Com SuperStack 4, Configuration Manual

Share
Download
3Com SuperStack 4 Configuration Manual Download Page 288

300

C

HAPTER

 12: F

ILE

 S

YSTEM

 M

ANAGEMENT

Table 343   

Configuration of the Switch as FTP Client

Table 344   

Configuration of the Switch as FTP Server

 The prerequisite for normal FTP function is that the Switch and PC are reachable.

Enabling/Disabling FTP 

Server

You can use the following commands to enable/disable the FTP server on the 
Switch. Perform the following configuration in System View.

Table 345   

Enable/Disable FTP Server

FTP server supports multiple users to access at the same time. A remote FTP client 
sends request to the FTP server. Then, the FTP server will carry out the 
corresponding operation and return the result to the client.

By default, FTP server is disabled.

Configuring the FTP 

Server Authentication 

and Authorization

You can use the following commands to configure FTP server authentication and 
authorization. The authorization information of FTP server includes the top 
working directory provided for FTP clients.

Perform the following configuration in the corresponding view.

Table 346   

Configure the FTP Server Authentication and Authorization

Device 

Configuration

Default

Description

Switch

Log into the remote FTP server directly with the 

ftp

 command. 

-- 

You need first get FTP user command and password, and then log into the 
remote FTP server. Then you can get the directory and file authority. 

PC

Start FTP server and make such settings as username, password, authority. 

--

--

Device 

Configuration

Default

Description

Switch

Start FTP server. 

FTP server is 
disabled. 

You can view the 
configuration information 
of FTP server with the 

display ftp-server 

command. 

Configure authentication and 
authorization for FTP server. 

-

Configure username, 
password and authorized 
directory for FTP users. 

Configure running parameters for 
FTP server. 

-

Configure timeout time 
value for FTP server. 

PC

Log into the Switch from FTP client.  -

-

Operation

Command

Enable the FTP server

ftp server enable

Disable the FTP serve

r

undo ftp server

Operation

Command

Create new local user and enter local User View 
(System View) 

local-user

 

username

 

Delete local user (System View)

undo local-user [ 

username

 

| 

all [ service-type ftp ] ]

Summary of Contents for SuperStack 4

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands