3Com SuperStack 4, Configuration Manual

Page: 27 / 432

User Interface Configuration 39
Perform the following configurations in User Interface (AUX user interface only)
View.
Configuring the Transmission Speed on the AUX (Console) Port
By default, the transmission speed on
the
AUX (console) port is 9600bps.
Configuring the Flow Control on the AUX (Console) Port
By default, the flow control on the AUX (console) port is none, that is, no flow
control will be performed.
Configuring Parity on the AUX (Console) Port
By default, the parity on the AUX (console) port is none, that is, no parity bit.
Configuring the Stop Bit of AUX (Console) Port
By default, the AUX (console) port supports 1 stop bit.
Configuring the Data Bit of the AUX (Console) port
By default, the AUX (console) port supports 8 data bits.
Table 12 Configuring the Transmission Speed on the AUX (Console) Port
Operation Command
Configure the transmission speed on the AUX
(console) port
speed
speed_value
Restore the default transmission speed on the AUX
(console) port
undo speed
Table 13 Configuring the Flow Control on the AUX (Console) Port
Operation Command
Configure the flow control on the AUX (console) port
flow-control { hardware |
none | software }
Restore the default flow control mode on the AUX
(console) port
undo flow-control
Table 14 Configuring Parity on the AUX (Console) Port
Operation Command
Configure parity mode on the AUX (console)
port
parity
{
even | mark | none |
odd | space
}
Restore the default parity mode
undo parity
Table 15 Configuring the Stop Bit of AUX (Console) Port
Operation Command
Configure the stop bit of the AUX (console) port
stopbits
{
1
|
1.5
|
2
}
Restore the default stop bit of the AUX (console) port
undo stopbits
Table 16 Configuring the Data Bit of the AUX (Console) Port
Operation Command
Configure the data bit of the AUX (console) port
databits
{
7
|
8
}
Restore the default data bit of the AUX (console) port
undo databits