3Com OfficeConnect 3CP4144, Cli User'S Manual

Page: 25 / 144

CLI Quick Setup Script 4-3
Along with a community name, you can limit access to a specific management
station. "0.0.0.0" means any station.
You also need to specify if this community can only read information, or read and
write information.
This completes the section on SNMP management configuration.
TELNET information
For TELNET management of the system, you need to create a user name and
password to control access.
Quick Setup IP information
The OfficeConnect Remote 812 uses a network name to identify the network for
future managment commands.
The IP mask can be specified either as a class ("A", "B", or "C"), the number of
one bits in the mask, or as an address in the format 255.x.x.x.
Question Default Your System
What is the IP address of the station for this
community? [0.0.0.0]
Question Default Your System
Can this community change management
information? [yes]
Question Default Your System
Do you want to allow command line management via
TELNET? [yes]
Question Default Your System
What user name will be allowed to manage this system? [root]
What password will be used for this user ? [ ]
Question Default Your System
Enter the network name of your IP network: [ip]
Enter the IP address for the OfficeConnect Remote
812: [192.168.200.25
4]