3Com OfficeConnect 3CP4144, Cli User'S Manual

Page: 27 / 144

CLI Quick Setup Script 4-5
The network number is a non-zero hexadecimal number of up to 8 digits.
You need to specify the framing for the IPX network. It should be one of the
following: “ethernet_ii”, “snap”, “dsap”, “novell_8023.”
Quick Setup Bridge Information
The network name is used by the OfficeConnect Remote 812 to identify your
bridging setup.
The spanning tree algorithm is used to eliminate loops in a network that is linked
together with bridges. You should run the spanning tree algorithm in the
OfficeConnect Remote 812 if you have multiple 812s linking your network to
another network; or if you think that there might be loops in your network.
Would you like to review your current settings before executing [yes]?
Sample Identification Information
This section contains a sample of possible settings.
Question Default Your System
Enter the name of your network: [ipx]
Question Default System
Enter the ipx network number: [ ]
Question Default System
What is the framing for the IPX network ? [ethernet_ii]
Question Default Your System
Enter the network name: [bridge]
Question Default System
Do you want to run the spanning tree algorithm? [no]