3Com OfficeConnect 3CP4144, Cli User'S Manual

Page: 77 / 144

A
OFFICECONNECT REMOTE 812 SAMPLE
CONFIGURATION
This section describes a sample configuration which illustrates the following
OfficeConnect Remote 812 ADSL Router features:
■
Address Translation
■
Internal DHCP Server and DNS Proxy.
■
Multiple Remote Sites, with different routing and bridging configurations.
Our sample SOHO network, shown below, has the OfficeConnect Remote 812
connected to a LAN that is using private IP addresses. The OfficeConnect Remote
812 is configured as the DHCP Server, dynamically assigning IP addresses and
configuration information to each locally connected workstation. Two Remote
Sites are defined, one to an ISP for Internet access, and another to the main
Corporate office. IP routing is enabled for the Internet site and both IP and IPX
routing as well as bridging is enabled for the Corporate site.
Our sample network is configured in 6 steps:
■
Global Configuration
■
IP LAN Network
■
DHCP and DNS
■
IPX LAN Network
■
Bridge LAN Network
■
Remote Sites
Remember to save your configuration using the save all command before
rebooting your OfficeConnect Remote 812 so that your changes will be written to
permanent FLASH memory.