manualshive.com logo in svg

3Com OfficeConnect 3CP4144, Cli User'S Manual

The 3Com OfficeConnect 3CP4144 user manual is available for free download on manualshive.com. This comprehensive release note manual provides detailed instructions and guidelines, enabling users to efficiently set up and utilize the product's advanced features. Explore a hassle-free downloading experience and unleash the full potential of your device with this invaluable resource.

Share
Download
background image

ii

3Com Corporation
5400 Bayfront Plaza 
Santa Clara, California 
95052-8145

Copyright © 2000 3Com Corporation. All rights reserved. No part of this documentation may be reproduced 
in any form or by any means or used to make any derivative work (such as translation, transformation, or 
adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from 
time to time without obligation on the part of 3Com Corporation to provide notification of such revision or 
change.

3Com Corporation provides this documentation without warranty of any kind, either implied or expressed, 
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. 
3Com may make improvements or changes in the product(s) and/or the program(s) described in this 
documentation at any time.

UNITED STATES GOVERNMENT LEGENDS:

If you are a United States government agency, then this documentation and the software described herein 
are provided to you subject to the following: 

United States Government Legend:

 All technical data and computer software is commercial in nature 

and developed solely at private expense. Software is delivered as Commercial Computer Software as defined 
in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such is 
provided with only such rights as are provided in 3Com’s standard commercial license for the Software. 
Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 
52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any 
legend provided on any licensed program or documentation contained in, or delivered to you in conjunction 
with this User’s Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may 
not be registered in other countries.

3Com, the 3Com logo, and OfficeConnect are registered trademarks of 3Com Corporation. OfficeConnect 
Remote 812 is a trademark of 3Com Corporation. 3ComFacts is a service mark of 3Com Corporation.

Artisoft and LANtastic are registered trademarks of Artisoft, Inc. Banyan and VINES are registered 
trademarks of Banyan Systems Incorporated. CompuServe is a registered trademark of CompuServe, Inc. 
DEC and PATHWORKS are registered trademarks of Digital Equipment Corporation. Intel and Pentium are 
registered trademarks of Intel Corporation. AIX, AT, IBM, NetView, and OS/2 are registered trademarks and 
Warp is a trademark of International Business Machines Corporation. Microsoft, MS-DOS, Windows, and 
Windows NT are registered trademarks of Microsoft Corporation. Novell and NetWare are registered 
trademarks of Novell, Inc. PictureTel is a registered trademark of PictureTel Corporation. UNIX is a registered 
trademark of X/Open Company, Ltd. in the United States and other countries.

Other brand and product names may be registered trademarks or trademarks of their respective holders.

Summary of Contents for OfficeConnect 3CP4144

















































































































































Reviews:

No comments

Related manuals for OfficeConnect 3CP4144

3Com 486 Getting Started Manual preview
486
Brand: 3Com Pages: 20
D-Link DES-3526 - Switch - Stackable Manual preview
DES-3526 - Switch - Stackable
Brand: D-Link Pages: 258
D-Link DIR-862L Manual preview
DIR-862L
Brand: D-Link Pages: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Brand: D-Link Pages: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Brand: D-Link Pages: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Brand: D-Link Pages: 8
D-Link DIR-865L Specifications preview
DIR-865L
Brand: D-Link Pages: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Brand: D-Link Pages: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Brand: D-Link Pages: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Brand: D-Link Pages: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Brand: D-Link Pages: 62
G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
Balluff Easy Tool-ID BSG TID-05-T30-00-005 Installation And Operation Manual preview
Easy Tool-ID BSG TID-05-T30-00-005
Brand: Balluff Pages: 46
MEMON memonizerWORKSTATION Quick Start Manual preview
memonizerWORKSTATION
Brand: MEMON Pages: 2
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Brand: UfiSpace Pages: 34
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108

Brands by name

Popular brands

Load more brands