3Com OfficeConnect 3CP4144, Cli User'S Manual

Page: 21 / 144

3
C
ONFIGURATION
M
ETHODS
OfficeConnect Remote 812 CLI offers three setup choices, all of which are
described in this section: the automated,
Quick Setup method, the QuickVC Setup
method, and the manual method. Review the capabilities of each below and
decide which configuration method best suits your needs, then proceed to the
appropriate chapter for detailed configuration guidelines for each method.
Quick Setup
Instructions
The Quick Setup program for the CLI is designed to get your OfficeConnect
Remote 812 up and running fast. To ensure that you have all the information you
need on hand
before you engage Quick Setup, we have supplied a script to jot
down system, management, and LAN configuration information. We recommend
that you fill out either script completely to get the full benefit of the program.
Used in combination with the QuickVC Setup program, Quick Setup allows
virtually complete console-based configuration of your OfficeConnect Remote 812
without requiring any knowledge of CLI command syntax.
The questions beginning in the next chapter represent nearly the full text of what
Quick Setup would query if you were to use every service available as configured
on the CLI. If you are using partial service - just IP configuration, for example -
Quick Setup will skip the Bridging section. Default values are enclosed in brackets
[ ] .
If at any time you decide to quit Quick Setup, you can type <ctrl>c (^c)
throughout the program.
QuickVC Setup
Instructions
The QuickVC Setup program for the CLI is designed to get virtual circuits for your
OfficeConnect Remote 812 configured quickly. To ensure that you have all the
information you need on hand
before you engage QuickVC Setup, we have
supplied a script to jot down information for VC connections. We recommend that
you fill out either script completely to get the full benefit of the program.
Used in combination with the Quick Setup program, QuickVC Setup allows
virtually complete console-based configuration of your OfficeConnect Remote 812
without requiring any knowledge of CLI command syntax.
The questions beginning in Chapter 5 represent nearly the full text of what
QuickVC Setup would query if you were to use every service available as
configured on the CLI. If you are using partial service QuickVC Setup will skip
some sections. Default values are enclosed in brackets
[ ] .