3Com OfficeConnect 3CP4144, Cli User'S Manual

Page: 61 / 144

System Administration 6-25
The name can be up to 32 characters long and the password can be up to 15
characters long.
■
To delete a login user, use the command:
delete user <name>
■
To change the password, use the command:
set user <name> password <new password>
■
To enable the use of CLI for TELNET users, issue the additional command:
enable security_option remote_user administration
Providing TFTP Access Trivial File Transfer Protocol (TFTP) provides a simple way to transfer files from one
machine to another. The OfficeConnect Remote 812 has a TFTP server that allows
you to copy files to or from the unit. All you have to do is set up TFTP access on
the OfficeConnect Remote 812 and run a TFTP client program on a workstation.
You can configure the OfficeConnect Remote 812 to provide access to all TFTP
clients or you can specify the IP addresses of the TFTP clients for restricted access.
■
To view the current TFTP client access list, use the command:
list tftp clients
■
To add a TFTP client to the list, use the command:
add tftp client <host name or IP address or 0.0.0.0>
Provide either the host name or the IP address of the workstation running the TFTP
client. An address of 0.0.0.0 allows all TFTP clients unrestricted access.
■
To remove a TFTP client from the list, use the command:
delete tftp client <host name or IP address or 0.0.0.0>
Setting Password
Protection
The OfficeConnect Remote 812 provides the capability to password-protect access
to the CLI. When the password protection feature is enabled, a user connecting to
the CLI via the serial console port will be prompted for the CLI password.
After the correct password is entered, all CLI commands are accessible by the user.
The user can 'exit' from the CLI to disable further access or can configure an idle
timeout period. If no commands are executed by the CLI for a period longer than
the idle timeout period, the user will automatically be logged out of the console.
The password will have to be re-entered in order to access the CLI again.
CLI password protection is disabled by default.
Password protection can be configured by the QuickSetup program or by using
CLI commands.
The Console password is independent of the Login Access passwords described on
6-25. Only the Console password can be used to gain access to the Console port.
■
To enable or disable CLI password protection, use the commands: