3Com Fast EtherLink 3C515-TX, User Manual, Page: 37 / 80

Installing the NDIS 2.01 Driver 4-5
4 Click OK.
Windows 95 reads in the W95EL515.INF file.
5 Select Fast EtherLink ISA NIC.
6 Go to Network on the Control Panel, and click once
on Fast EtherLink ISA NIC.
7 In the Driver Type tab, click Properties, and then
Real Mode (16 bit) NDIS Driver.
8 Click OK.
9 Restart your PC when prompted.
The NDIS 2 driver installation is complete.
IBM LAN Server 4.0 for DOS and OS/2
To install the 3Com NDIS 2 driver for IBM LAN Server 4.0,
follow these procedures, which are provided for both
DOS and OS/2 installations.
LAN Services v4.0 for DOS
DOS must be already installed on your PC. To install the
driver, perform these steps:
1 Insert the DOS LAN Services Disk 1 diskette in
drive A.
2 Switch to that drive and type:
install [Enter]
3 Select the directory where you want the software
installed.
The default directory is C:\NET. A menu appears that
provides a list of network cards.
4 Select Network card not shown in the list below...
5 Type:
a:\ibm_40 [Enter]