manualshive.com logo in svg

3Com EtherLink 3C980C-TXM, User Manual, Page: 77 / 112

Share
Download
3Com EtherLink 3C980C-TXM User Manual Download Page 77

Removing Server Features

77

NetWare

To remove the network driver:

1 Enter this command at the prompt:

NetWare 4.2: 

load install

 

NetWare 5.0: 

load nwconfig

 

2 In the Installation Options screen, select 

Driver options.

3 In the Driver Options screen, select 

Configure network drivers.

The Selected Network Drivers screen appears, listing all 
previously saved drivers in the system.

4 From the list of drivers, select 3C980. 

5 In the Additional Driver Actions screen, select 

Deselect a selected driver and press Enter.

6 Follow the prompts to remove the driver.

Removing Server Features

Follow the steps for your operating system.

Windows NT

To remove Dynamic

Access

 technology server features:

1 From the Start menu, select Settings/Control Panel.

2 Double-click the Network icon. 

3 In the Network window, click the Protocols tab.

4 In the Protocols tab, select DAPass Thru Driver 

Transport. 

5 Click Remove.

6 Follow the prompts to remove the software and 

reboot the server.

Summary of Contents for EtherLink 3C980C-TXM

















































































































Reviews:

No comments