Maintaining Groups
61
help
This command displays the syntax for the Dynamic
Access
server features commands.
link timeout
When a group is being created, the software waits the
number of seconds specified by this command for the
link/topology check to finish and then displays timeout
information.
probe interval
This command sets the probe packet interval. If no
argument is specified or the specified argument is invalid,
the current value is displayed. Otherwise, the new value
is displayed.
receive timeout
This command sets the receive timeout individually for each
group and displays a message for each loaded frame type.
Syntax
lbrsl help
Syntax
lbrsl link timeout
seconds
where:
seconds is the time in seconds.
Example
lbrsl link timeout 10
Default
5
Syntax
lbrsl probe interval
seconds
where seconds is the interval in seconds.
Example
lbrsl set probe interval 1
Default
1 second
If the delay is longer than 1 second, NIC or link failures
are not recognized as quickly.
Syntax
lbrsl receive timeout
pri_slot
seconds
where:
pri_slot is the PCI slot number of the primary NIC.
seconds is the time in seconds
Example
lbrsl receive timeout 10001 1
Default
1 second
