Configuring Groups and VLANs
39
c
Click
Configure
.
d
In the NIC Properties window, click TCP/IP.
e
In the next window, configure the IP address and subnet
mask.
Specifying Traffic Priorities
You can use the Dynamic
Access
Software Setup window to
specify traffic priorities.
1 Double-click the 3Com DynamicAccess icon in the
Windows Control Panel.
The Dynamic
Access
Software Setup window appears.
2 Click the appropriate tab:
■
Traffic Prioritization
—Prioritize applications to ease
bottlenecks in the network and allow critical
applications to take network precedence. You can turn
traffic prioritization on or off independently for:
■
Each NIC that is not in a group and does not have
VLANs
■
Each group that does not have VLANs
■
Each VLAN
■
Each virtual NIC (NIC, group, or VLAN) shown in the
Traffic Prioritization control panel
■
Administration
—Set Dynamic
Access
control panel
access, set VLAN options, enable efficient multicast
control, and enable the prioritizing of multicast traffic.
Saving the Configuration
To save and exit, click
OK
.
A prompt asks whether you want to configure traffic
prioritization. If you click
Yes
, the Dynamic
Access
Software
Setup window appears.
To exit without saving the configuration, click
Cancel
.
For detailed information on Dynamic
Access
software,
go to:
http://www.3com.com/dynamicaccess
