3Com CoreBuilder 3500 Manual Download Page 61

Page: 61 / 92

Table 12

Hunt Group Behavior

Condition

Linear Hunt Group

Result

Circular Hunt Group

Result

Calling Group Result

No members

Go to call coverage.

All members
logged out

Go to call coverage.

Wait for a member to log in
till the total timeout value is
reached.

Wait for a member to log in till
the total timeout value is
reached.

All members
busy

Go to call coverage.

Wait for a member to
become available till the
total timeout value is
reached.

Queue the call and wait for an
available member till the total
timeout value is reached.

All members
available

Route call to the first
member in the list.

Route call to the member
following the member to
whom the last call was
routed.

Ring all member phones.

Total timeout
reached

Go to call coverage.

Hunt group calls routed to a call coverage point always go to the point configured for

the hunt group, not to the point configured for (or by) the hunt group member (that is,

the member’s personal call coverage point).

If you are a hunt group member and you enable Do Not Disturb, personal (non-Hunt

Group) calls go to your call coverage point. However, hunt group calls always ring on a

member’s telephone, regardless of the Do Not Disturb setting.

If your telephone is part of a bridged extension, see Hunt Groups and Bridged Line

Calls for additional information.

Logging In to a Hunt Group

When your administrator gives you your hunt group membership information, you can

groups). You must be logged in to a hunt group to receive calls for that group.

You must be logged in to your VCX system account before you can log in to a hunt

group. If you are not logged in to the VCX system, which requires password

authentication, you cannot log in to a hunt group. See the overview section for your

telephone in this guide.

To log in to a hunt group:

1 Press the

Feature

soft button.

2 Scroll to

Advanced Settings

3 Scroll to

Hunt Group Login Enabled

4 Press

Select

5 Enter the hunt group number.

6 Enter the hunt group password, and then press

To log out of a hunt group, use similar steps.

Summary of Contents for CoreBuilder 3500





























































































Search results

Summary of Contents for CoreBuilder 3500

Reviews:

Related manuals for CoreBuilder 3500

Brands by name

Popular brands

3Com CoreBuilder 3500, Manual

Search results

Summary of Contents for CoreBuilder 3500

Reviews:

Related manuals for CoreBuilder 3500

Brands by name

Popular brands