1-18
Related commands:
lldp hold-multiplier
,
lldp timer tx-interval
.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp
lldp enable
Syntax
lldp enable
undo lldp enable
View
System view, Ethernet interface view
Parameters
None
Description
Use the
lldp enable
command to enable LLDP.
Use the
undo lldp enable
command to disable LLDP.
By default, LLDP is disabled globally, and is enabled on a port.
Note that LLDP takes effect on a port only when it is enabled both globally and on the port.
Examples
# Disable LLDP on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo lldp enable
lldp encapsulation snap
Syntax
lldp encapsulation snap
undo lldp encapsulation
[
snap
]
View
Ethernet interface view
Parameters
None
Summary of Contents for 5500-EI Series
