3Com 5500-EI Series, Reference Manual

Page: 1002 / 1314

1-26
Examples
# Specify the publickey authentication as the default authentication mode.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname]ssh authentication-type default publickey
# Create an SSH user
[Sysname] ssh user user1
# Display information about configured SSH users.
[Sysname] display ssh user-information
Username Authentication-type User-public-key-name Service-type
user1 publickey null stelnet
ssh client assign
Syntax
ssh client { server-ip | server-name } assign { publickey | rsa-key } keyname
undo ssh client { server-ip | server-name } assign { publickey | rsa-key }
View
System view
Parameters
server-ip : IP address of the server.
server-name : Name of the server, a string of 1 to 184 characters.
keyname : Name of the public key of the server, a string of 1 to 64 characters.
Both the publickey and rsa-key keywords indicate specifying the publickey key. They are implemented
with the same method.
Description
Use the ssh client assign command to specify the name of the public key of the server on the client so
that the client can authenticate whether the server to be accessed is reliable.
Use the undo ssh client assign command to remove the mapping between the client and the public
key of the server.
By default, a client does not have the name of the server’s public key specified and it uses the IP
address or host name that it used to log in to the SSH server as the public key name.