manualshive.com logo in svg

3Com 5500-EI Series, Reference Manual

Share
Download
3Com 5500-EI Series Reference Manual Download Page 439

 

4-5 

Parameters 

group-address

: Multicast group address. With this argument provided, the command displays the (S, G) 

entries for the specified multicast group.  

source-address

: Multicast source address. With this argument provided, the command displays the (S, 

G) entries for the specified multicast source.  

as-number

: AS number, in the range of 1 to 65535. 

Description 

Use the 

display msdp sa-cache

 command to display (S, G) entries in the SA cache. 

Note that: 

z

 

This command gives the corresponding output only after the 

cache-sa-enable

 command is 

executed. 

z

 

If no group address is specified, this command displays the (S, G) entries for all multicast groups. 

z

 

If no source address is specified, this command displays the (S, G) entries corresponding to all 

multicast sources.  

z

 

If neither a group address nor a source address is specified, this command displays all the (S, G) 

entries.  

z

 

If no AS number is specified, this command displays the (S, G) entries related to all ASs. 

Examples 

# Display all (S, G) entries in the SA cache. 

<Sysname> display msdp sa-cache 

MSDP Total Source-Active Cache - 5 entries 

 

(Source, Group)                  Origin RP       Pro   AS   Uptime   Expires 

(10.10.1.2, 225.1.1.1)          10.10.10.10      ?    ?   00:00:10 00:05:50 

(10.10.1.3, 225.1.1.1)          10.10.10.10      ?    ?   00:00:11 00:05:49 

(10.10.1.2, 225.1.1.2)          10.10.10.10      ?    ?   00:00:11 00:05:49 

(10.10.2.1, 225.1.1.2)          10.10.10.10      ?    ?   00:00:11 00:05:49 

(10.10.1.2, 225.1.2.2)           10.10.10.10       ?     ?   00:00:11 00:05:49 

 

 MSDP matched 5 entries 

Table 4-3 display msdp sa-cache

 command output description 

Field 

Description 

MSDP Total Source-Active Cache - 5 entries 

Total number of (S, G) entries in the SA cache 

(Source, Group) 

(S, G) entry: (source address, group address)  

Origin RP 

Address of the RP that generated the (S, G) 
entry  

Pro 

Type of protocol from which the AS number of 
the origin RP is originated. “?” indicates that the 
system was unable to obtain the protocol type  

AS 

AS number of the origin RP. “?” indicates that the 
system was unable to obtain the AS number  

Summary of Contents for 5500-EI Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands