1-30
accounting-on enable
Syntax
accounting-on enable
[
send
times
|
interval interval
]
undo accounting-on
{
enable
|
send
|
interval
}
View
RADIUS scheme view
Parameters
times
: Maximum number of attempts to send an Accounting-On message, ranging from 1 to 256 and
defaulting to 15. If the maximum number has been reached but the switch still receives no response
from the CAMS, the switch stops sending Accounting-On messages.
interval
: Interval to send Accounting-On messages (in seconds), ranging from 1 to 30 and defaulting to
3.
Description
Use the
accounting-on enable
command to enable the user re-authentication at restart function.
Use the
undo accounting-on enable
command to disable the user re-authentication at restart
function and restore the default interval and maximum number of attempts to send Accounting-On
messages.
Use the
undo accounting-on send
command to restore the default maximum number of attempts to
send Accounting-On messages.
Use the
undo accounting-on interval
command to restore the default interval to send Accounting-On
messages.
By default, the user re-authentication at restart function is disabled.
The purpose of this function is to solve this problem: users cannot re-log into the switch after the switch
restarts because they are regarded as already online. After this function is enabled, every time the
switch restarts, it sends an Accounting-On message to the RADIUS server to tell the server that it has
restarted and ask the server to log out its users. The following gives the operations after the switch
restarts:
1) The switch generates an Accounting-On message, which mainly contains the following information:
NAS-ID, NAS-IP-address (source IP address), and session ID. You can configure the
NAS-IP-address argument manually by using the
nas-ip
command. When configuring the
NAS-IP-address argument, be sure to specify an appropriate valid IP address. If you do not
configure the NAS-IP-address argument, the switch automatically uses the IP address of a VLAN
interface as the NAS-IP-address.
2) The switch sends the Accounting-On message to the CAMS at regular intervals.
3) Once the CAMS receives the Accounting-On message, it sends a response to the switch. At the
same time it finds and deletes the original online information of the users who were accessing the
network through the switch before the restart according to the information (NAS-ID,
Summary of Contents for 5500-EI Series
