manualshive.com logo in svg

3Com 5500-EI Series, Reference Manual

Share
Download
3Com 5500-EI Series Reference Manual Download Page 408

 

2-8 

 

In LoopBack interface view, this command does not support the 

port

 

interface-list 

option.

 

 

Description 

Use the 

igmp host-join

 

port

 command to configure one or more ports under the current VLAN 

interface as specified multicast group member(s), namely configure the port(s) as simulated member 

host(s) for a specified multicast group.  

Use 

undo

 

igmp host-join

 

port

 command to restore the default. 

By default, simulated joining is disabled.  

Examples 

# Configure Ethernet 1/0/1 under VLAN-interface 10 as a simulated member host to join multicast group 

225.0.0.1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Vlan-interface 10 

[Sysname-Vlan-interface10] igmp host-join 225.0.0.1 port Ethernet 1/0/1 

igmp host-join vlan 

Syntax 

igmp host-join

 

group-address vlan vlan-id

 

undo igmp host-join

 

group-address vlan vlan-id

 

View 

Ethernet port view 

Parameters 

group-address

: Address of the multicast group to join. 

vlan vlan-id

: Specifies the VLAN to which the port belongs. The effective range for 

vlan-id

 is 1 to 4094. 

Description 

Use the 

igmp host-join

 

vlan

 command to configure the current Ethernet port as specified multicast 

group member, namely configure the port as simulated member hosts for a specified multicast group.  

Use the 

undo

 

igmp host-join

 

vlan

 command to restore the default. 

By default, simulated joining is disabled.  

Related commands: 

igmp

 

group-policy

. 

Examples 

# Configure Ethernet 1/0/1 under VLAN-interface 10 as a simulated member host to join multicast group 

225.0.0.1.  

Summary of Contents for 5500-EI Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands