1-3
Description
Use the
bootfile-name
command to specify a bootfile name in the DHCP global address pool for the
client.
Use the
undo bootfile-name
command to remove the specified bootfile name from the DHCP global
address pool.
By default, no bootfile name is specified.
If you execute the
bootfile-name
command repeatedly, the latest configuration will overwrite the
previous one.
Examples
# Specify the bootfile name
aaa.cfg
in DHCP global address pool 0 for the client..
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-ip-pool-0] bootfile-name aaa.cfg
dhcp enable
Syntax
dhcp enable
undo dhcp enable
View
System view
Parameters
None
Description
Use the
dhcp enable
command to enable DHCP.
Use the
undo dhcp enable
command to disable DHCP.
By default, DHCP is enabled.
Note that: You need to enable DHCP before performing other DHCP-related configurations.
Summary of Contents for 5500-EI Series
