2-12
View
Interface view
Parameters
seconds
: Other querier present interval in seconds, in the range of 1 to 131,070.
Description
Use the
igmp timer other-querier-present
command to configure the other querier present interval,
namely the length of time a non-querier waits before it assumes that the current IGMP querier is down.
Use the
undo
igmp timer other-querier-present
command to restore the default value.
By default, the other querier present interval is twice the value of IGMP query interval, that is, 120
seconds if the IGMP query interval has not been manually configured.
On a multi-access network, that is, the same network segment including multiple multicast routers, the
query router (known as querier) is responsible for sending general query messages periodically through
the VLAN interface. If a non-queriers receive no query messages within the other querier present
interval, it assumes that the current querier is down and a new querier election process takes place.
In IGMP version 1, the selection of a querier is determined by the multicast routing protocol. In IGMP
version 2, the router with the lowest IP address on the shared network segment acts as the querier.
Related commands:
igmp timer query
,
display igmp interface
.
Examples
# Configure the querier to expire in 300 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp timer other-querier-present 300
igmp timer query
Syntax
igmp timer query
seconds
undo igmp timer query
View
Interface view
Parameters
seconds
: IGMP query interval, namely the interval between IGMP general query messages, in the
range of 1 to 65,535 seconds.
Description
Use the
igmp timer query
command to configure the interval between IGMP general query messages.
Use the
undo
igmp timer query
command to restore the default.
By default, the IGMP query interval is 60 seconds.
Summary of Contents for 5500-EI Series
