3Com 4007, Command Reference Manual

Page: 183 / 574

bridge vlan detail
183
rxUcastFrames
(Multilayer Switching
Modules only)
Number of received unicast frames
Tag type
(Multilayer Switching
Modules only)
Whether tagging is set to
none
or
802.1Q
(IEEE
802.1Q tagging)
txBcastBytes
(Multilayer Switching
Modules only) Number of transmitted broadcast bytes
txBcastFrames
(Multilayer Switching
Modules only) Number of transmitted broadcast frames
txMcastBytes
(Multilayer Switching
Modules only) Number of transmitted multicast bytes
txMcastFrames
(Multilayer Switching
Modules only) Number of transmitted multicast frames
Type
(VLAN Mode) Either
allOpen
or
allClosed
. VLANs in allOpen
mode share a single address table for all configured
VLANs. In allClosed mode, each VLAN has its own
unique address table. Standard bridging rules apply
based on the table addresses that are assigned to the
specific VLAN. Router port IP interfaces require
allClosed mode.
VID Unique, user-defined integer (VLAN ID) that identifies
this VLAN. It is used by management operations. You
can assign or modify a VID that is associated with a
static VLAN; you cannot modify the VID selected
automatically after you define a router port IP interface,
nor can you change the VID of the default VLAN. The
default VLAN requires a VID of 1.
VLAN Aware Mode
(Multilayer Switching
Modules only) Whether the VLAN aware mode (tagging mode) is
allPorts
or
taggedVlanPorts
. The default is
allPorts
. The value
taggedVlanPorts
is a
compatibility mode for VLANs configured on
CoreBuilder 9000 Layer 3 modules prior to Release 3.0.
Field Description