3Com 4007, Command Reference Manual

Page: 181 / 574

bridge vlan detail
181
■
GVRP is based on IEEE 802.1Q and allows for dynamic configuration
of port-based VLANs. GVRP can help you simplify the management of
VLAN configurations in larger networks. Use the command
bridge port gvrpState
to explicitly enable GVRP on the
participating bridge ports and use the command
bridge gvrpState
to enable the bridge GVRP state for the entire module. The bridge
GVRP state enables you to control GVRP on the module without losing
the per-port GVRP state. By default, the GVRP state for the entire
module is
disabled
and the GVRP state for each bridge port is
disabled
.
Options
Fields in the Bridge VLAN Detail Display
Prompt Description Possible Values [Default]
VLAN interface
index Index numbers of
the VLAN interfaces
for which you want
detailed information
■
One or more
selectable VLAN
interface index
numbers
■
all
■
? (for a list of
selectable indexes)
1 (if you
have only
one VLAN)
Field Description
Ignore STP mode
(Multilayer Switching
Modules only) Whether a VLAN can ignore ports that are blocked by
STP and let certain traffic pass through. Possible values:
enabled
and
disabled.
Index Module-assigned index number that identifies a VLAN.
Statistics appear for the VLAN that you specify.
Layer 3 addresses
(Multilayer Switching
Modules only) Information that is used to set up flood domains for
overlapping IP VLAN subnetworks (network-based
VLANs).
Name Character string
0
through
32
bytes that identifies the
VLAN. The default VLAN always uses the name
Default
.