3Com 4007, Command Reference Manual

Page: 134 / 574

134 C
HAPTER
7: B
RIDGE
P
ORT
P
ARAMETERS
portNumber Logical index number that the module assigns to the
bridge port, which may not correspond with the physical
port number depending on your configuration. (For
example, when you define a trunk, only the anchor port
receives a portNumber.) As you add and remove logical
ports, portNumbers are reassigned so that they remain
consecutive.
portId Port identification, which includes the port priority value
(first 2 digits after “0x”) and the logical port number (last
2 digits). Both are shown as hexidecimal values.
priority Configurable STP port priority value. The default value is
0x80. (0x signifies that the value to follow is a
hexadecimal number.) The acceptable range is 0x0 – 0xff.
To configure port priority values, see “bridge port
stpPriority” in this chapter.
The port priority is included in the port ID and is
considered the most significant portion because it is the
first factor that determines if a port is to be the
designated port when more than one bridge port is
attached to the same LAN. The lowest priority is chosen. If
all ports in a bridge have the same priority, then the port
number is used as the determining factor.
rxAllFilters
(Multilayer Switching
Modules only) Number of frames that the bridge port discarded due to a
user-defined packet filter on its “receive all” path.
rxBlockedDiscs
(Multilayer Switching
Modules only) Number of frames that the bridge port discarded because
the receiving bridge port was not in the forwarding state.
rxErrorDiscs Number of frames that the bridge port discarded because
of internal bridge errors (such as hardware and software
address table discrepancies).
rxForwards
(Multilayer Switching
Modules only) Total number of frames (all types) that the bridge port
received and forwarded to another bridge port.
rxForwardMcasts
(Layer 2 Switching
Modules only) Number of multicast frames that the bridge port received
and forwarded to another bridge port.
rxForwardUcasts
(Layer 2 Switching
Modules only) Number of unicast frames the bridge port received and
forwarded to another bridge port.
rxFloodUcasts Number of unicast frames that the port received and
flooded to one or more ports.
Field Description