3Com 4007, Command Reference Manual

Page: 430 / 574

430 C
HAPTER
16: I
NTERNET
P
ACKET
E
XCHANGE
(IPX)
Layer 2
Switching
Modules
✓
Multilayer
Switching
Modules
ipx interface modify Changes the characteristics of an existing IPX interface on a Multilayer
Switching Module.
Valid Minimum Abbreviation
ipx i m
Important Considerations
■
An IPX interface defines the relationships among an IPX virtual LAN
(VLAN), the IPX router, and the IPX network. The IPX router has one
IPX interface defined for each network that is directly connected to it.
■
When you modify an interface, you can change the interface’s IPX
address, ticks, format, and the associated IPX VLAN index.
■
Unless your network has special requirements (for example, a need for
redundant paths), do not change the cost value of 1 that is assigned
by default to each interface.
Options
Prompt Description Possible Values [Default]
Index Number associated with the interface
that you want to modify.
■
One or more
selectable IPX
interfaces
■
? (to view a list
of selectable
interfaces)
1 (if only 1
interface)
IPX
network
address 4-byte IPX address of the interface.
The address must be unique within
the network. 0x1 – 0xfffffffe Current
address
Ticks Number that the module uses to
calculate route ticks. (A tick is an
estimate of how long a packet takes
to reach the network segment.)
There are 18.21 ticks in a second. 1 – 65534 where:
■
1 = FDDI
■
4 = Ethernet
■
10+ = Serial Link
Current
setting