3Com 4007, Command Reference Manual

Page: 158 / 574

158 C
HAPTER
8: T
RUNKING
(L
INK
A
GGREGATION
)
■
You must reboot the module at the end of the trunk definition
process. (You can define multiple trunks in one
bridge trunk define
operation.) Rebooting a module (
module reboot
command) returns
you to the Management Module CLI prompt, which requires you to
reconnect to the module.
Options
Prompt Description Possible Values [Default]
Mac type
(if you
have more
than one) Media type for the trunk.
■
Depends on your module
■
? (for a list of selectable
media types)
–
Ports Total number of the bridge
ports that you want to be
part of the trunk.
■
Layer 2 Switching Modules
support up to 4 trunk
groups with up to 6 ports
per trunk
■
Multilayer Switching
Modules support up to 3
trunk groups with up to 6
ports per trunk
■
The 24-port switch fabric
module supports up to 12
trunk groups with up to 6
ports per trunk
■
The 9-port switch fabric
module supports up to 9
trunk groups with up to 6
ports per trunk
■
all
■
? (for a list of selectable
ports)
–
Mode Operating mode for the
trunk.
■
100half, 100full
■
10half, 10full, 100half,
100full
–
Flow
control Flow control setting
(Ethernet only)
■
on
■
off
■
rxOn (Gigabit Ethernet)
■
txOn (Gigabit Ethernet)
off
Trunk
name Name of the trunk.
Use quotation marks (")
around any string with
embedded spaces.
■
Maximum 32 alphanumeric
characters
■
? (for a list of selectable
names)
–