3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server, User Manual, Page: 78 / 94

78 A
PPENDIX
C: U
NIX
S
YSTEMS
LPD on IBM AIX 4.15 Before proceeding, ensure that the Print Server has been assigned an IP
Address. To setup your AIX system for LPD printing, perform the
following steps.
1 Add the Print Server to
/etc/hosts.lpd
, using the name you assigned
to the Print Server.
2 Start the LPD daemon if it is not running, using the following command:
start src -s qdaemon
3 Start the system administration tool smit and select Print Spooling.
4 Create the required number of queues (one for each logical printer) by
selecting:
a Add a Print Queue
b Remote (Printer attached to Remote Host)
c Standard Processing
5 Use the following information:
Ensure that the logical printers are configured in the Print Server.
6 Print using the following command:
lp -d printer_queue file_name
where:
■
printer_queue
is one of the entries used in Name of queue to add .
■
file_name
is the file you wish to print.
LPD on System V Before beginning LPD Setup, ensure that an IP Address has been assigned
to the Print Server. Keep the following points in mind:
Field Entry
Name of queue to add Use a single-word queue name, which
indicates which printer is attached.
Hostname for remote server Print Server name as used in
/etc/hosts.lpd
.
Name of queue on remote
server Logical printer number, for example, L1 to
service this queue.
Type of print spooler on remote
server Use default value (AIX Version xxx).