3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server, User Manual

Page: 59 / 94

AppleTalk (Macintosh) Problems 59
AppleTalk
(Macintosh)
Problems
Problem No. 1 Why do I get an incorrect printout?
Solution No. 1 Some possible reasons are:
■
You may have chosen Binary encoding to print the file. Try to use
ASCII encoding.
■
Some of the fonts, which are in your print file may not be supported
by the printer. Try selecting LaserWriter 7 instead of LaserWriter 8.
Problem No. 2 Can not find the Print Server's name in the Chooser.
Solution No. 2 Try the following:
1 Make sure that AppleTalk is on (the button next to Active is highlighted in
the Chooser).
2 Make sure the printer has been on and in the READY state for a few
minutes.
3 Make sure the printer has not been renamed since its last appearance in
the Chooser.
4 If the printer resides on a network with multiple zones, make sure the
correct zone is selected from the AppleTalk Zones box in the Chooser.
Problem No. 3 My EPS file does not print with the correct fonts.
Solution No. 3 This is a problem that occurs in some application programs. Try
downloading the fonts contained in the EPS file before printing the saved
EPS file.
Problem No. 4 I can not select the Remaining from: item in the print dialog box.
Solution No. 4 If you have selected the Layout value, 2 Up , or 4 Up , you cannot access
the Remaining from item. Choose other selections.
Problem No. 5 A cover page prints either on the first or the last page of the document.